High Lifter Products
High Lifter Lift Kit 2" Polaris Ranger 500/700/800 EFI Ranger 2009-2010
- SKU:
- 63-6977-WPS-J
- Condition:
- New
- Shipping:
- Free Shipping
Description
New Arrival, Special Heavy Duty Lift Kit. Ready to Install.
Fitment
2011 Polaris Ranger 800 4x4 EPS
2011 Polaris Ranger 800 4x4
2011 Polaris Ranger 800 HD 4x4
2011 Polaris Ranger 800 CREW 4x4
2010 Polaris Ranger 800 CREW 4x4
2010 Polaris Ranger 800 4x4
2009 Polaris Ranger 700 HD EFI 4x4
2009 Polaris Ranger 700 XP 4x4
2010 Polaris Ranger 800 HD 4x4
2010 Polaris Ranger 800 4x4
2012 Polaris Ranger 800 4x4 EPS
2012 Polaris Ranger 800 4x4
2012 Polaris Ranger 800 HD 4x4
2012 Polaris Ranger 800 CREW 4x4
2013 Polaris Ranger 800 4x4
2013 Polaris Ranger 800 CREW 4x4
2014 Polaris Ranger 800 4x4
2014 Polaris Ranger 800 CREW 4x4
Notes:
Relocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our lift consistently measures truer (and higher) than the competition!High Lifter's Pro Series Alignment Kit (PSAK-1) is REQUIRED if you own or are buying PLK800R-50 or ANY brand of Ranger lift kit and have upgraded or are upgrading to the Pro Series Ranger Tie Rod/Rack End Kit. This kit also upgrades from the OEM 10mm bolt to a 1/2" Gr. 8 bolt to match the heavy duty heim joint in our Tie Rod/Rack End Kit. The alignment kit comes with 2 alignment cones and all hardware required to upgrade both sides of the Ranger.
- All hardware needed for successful installation
- Bolt-on application; takes approximately 1-2 hours for install
- Zinc plated
- Front and rear lift
- Clear-coated High Lifter name plate
Polaris 800 EFI Ranger XP, HD IRS - Up to 28"
Polaris 800 Ranger Crew IRS - Up to 28"
1.5" spacers are recommended, but a MINIMUM of a 1" wheel spacer is required on the front if you are running 12" diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires a 1.5" or wider spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering.
Save Money, In Stock Ready to Ship Today!
Please Note: we use a generic photo for our listing..this item is similar to the photo and has the same appearance may vary depending on your specific year and model.
Additional Information
Manufacturer Part Number: |
PLK800R-50 |
Placement on Vehicle: |
Front Rear |
Warranty: |
1 Year |
Country of Manufacture: |
United States |
Brand: |
High Lifter Products |
Fits: |
Atv |
Compatible Make: |
Polaris |
Compatible Model: |
Ranger 500/700/800 EFI Ranger |
Part Type: |
Suspension |
Type: |
Lift Kit |
Years: |
2009-2010 |
MPN: |
PLK800R-50 |